Blink V2
Its been a long wait but finally we are proud to release the new Blink v2 Delta
Its bigger, and better than its predecessor making battery choice and installation much easier and versatile than before. Ultralight wing loading often only found on sailplanes.
Gone are the ply ribs that are prone to warps before building. All ribs and spars and now 2.5mm Balsa. The elevons are shaped to section too rather than just being 3mm flat sheet balsa.
The battery bay will accept anything from a single 3s 650mah pack for a lightweight setup for sport flying right the way through to 2 4s 850mah Packs for those who want to explore an insane 8s setup! (Something we haven't been brave enough for yet) Keeping it sensible for the sport flier you can fit a 3s 2200 lipo for extended flight times if your happy with the weight penalty.
The new Blink has product enhancements we have been using successfully now on other
designs which all add to the functionality or the model and ease some of the construction.
High quality 3d printing is utilised in key areas to make the build simple and accurate.
Details
- 750mm Wingspan
- 380 - 500g flying weight
- Wing Area 23.36dm2 / 362sq"
- Wing Loading 16-21.4g dm2 / 5.4-7.1oz sqft
RC Requirements
- 2205 to 2506 brushless motors (1850 to 2700kv)
- 5x5 Prop
- 40 to 60 amp Brushless esc
- 2 x 12g Metal Geared servos
-
4 channel Rx
Kit Contains
- Balsa Ribs and Main Spars
- Hardwood dowel Leading edges
- Balsa Elevon material
- Balsa Sheet Fin
- Plywood Hatch Formers
- 3d Printed removeable motor Mount
- 3d Printed Main Motor Bulkhead
- 3d Printed Magnetic Hatch retaining system
- 3d Printed grips for hand launching
- 1 pair of adjusta Horn Control Linkages
- Carbon tube reinforced music wire elevon pushrods
- Motor Retaining screws and Motor mount hardware
- Blink and AngelWingDesigns Decal
Whilst the blink is not a difficult model to build it is not intended for new pilots.
This is a RC Model Aircraft kit and is not a toy. Adult supervision will be required at all times.