Gator - Mini RC Airboat

Please note these kits are printed to order. More colours coming soon.

Mini 3d Printed airboat for fun in small areas of shallow water.
Powerful air rudder coupled with a pitch control wing mounted
directly to the rudder, this little boat pop up quickly onto the plane.
The motor mount has aerodynamic flow control eliminating most of the
torque reaction generated from the propeller. Experimental, optional 
hydroplane forward fins can improve the tracking if desired.

Printed in PETG filament with structural ribs designed into the one piece
Hull / Motor mount and prop guard. TPU flexible battery grip for 20 or 24mm
wide batteries. Just 8 3d printed components, 2 nylon bolts and 2 M3mm steel studs make up this quick to assemble airboat.

Printed Kit contains

Rudder Servo
PETG Hull
PETG Rudder
PETG Tail
PETG Fin Posts
PETG G Radio box Cover
TPU Bump Strip
2 x TPU Battery Grips
2 M3 Nylon Bolts
2 M3 Steel Studs
Piano Wire Rudder Pushrod
Vinyl Decals

Requires 2s 1000 to 3s 650mah Lipo
Xing 1404 3800KV Brushless
3016 3 Blade Prop (3s) or 3030 3 Blade Prop 2s
Small 20 - 35 amp esc
(BEC for servo rqd if not fitted to ESC)
CA Adhesive for Bump Strip
Silicone adhesive
Suitable 2 - 4 channel micro RX and TX

3D print files are also available to purchase.
Files are sent via email within 24hrs under normal circumstances.
The design is intended to be printed on a printer with a 256 cubed 
build volume. Basic instructions for printing are supplied with the print files.

Gator Mini RC Airboat © 2024 by AngelWingDesigns is licensed under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International